Ordering & gathering parts. Sta-tru steel wheels came in,12ga.stainless steel spokes, chrome steel rim 2.215" x26" disc up-front & coaster brake rear. Really heavy duty I've used them on other builds as well as Workman. I like them both. I'm mounting Duro flame 2.4" on both. I'm planning on running a bike bottom bracket & peddles with wide crank & reduction gear on motor side. I also plan on running 2 peanut tanks side by side in the stock Simplex location which gives about 20" vertical space for the CG-150.They actually fill the stock tank location well & hold 4 liters total. I also received a 210mm 3/8" axle for the rear wheel, along with two thread-on 14mm axle adaptors for the half inch rear drops which I'll bring out to 14mm also & use BMX style wheel adjusters. I've also ordered a 58 tooth sprocket & sprocket hub adaptor. My design plan is to make a Simplex which in concept harkens back to the early 1900s period of motobike building...peddles, small bike frames, bicycle tires, coaster brakes. At the same time upgrading with disc brakes, multispeed, electric start & power...while retaining the inherent stance, size, nimbleness & attitude of the Simplex.
I was also notified that the Sunlite dual springer forks had shipped along with the flame tires, no word on the power plant. Headset parts already here. Rick C.