General Category => Simplexes with Non-Original Engines => Topic started by: panheadguy on June 02, 2019, 06:59:42 AM
-
I'm using a clone 212 to re-power my Simplex. I ordered everything except the torque converter from Wayne because I had one from another project. It's an aysemetric setup. It turns out my driven pulley will not work due to it having a 5/8" bore and the kit need a 3/4" bore..... I found a 30 series 6" driven on ebay with a 3/4" bore. Like $35 It should work right?
-
Yes, should work fine. 30 series is asymmetric. I have used 2 of these in the past on Simplex conversions, they work really well.
-
Is this the correct unit for a Predator 212? This has a 3/16th keyway. Will it work also on a Honda GC190 engine. Also a photo of my ride. That's a whizzer wheel with a whizzer sheave on my bike mocked up. I want to use belts on my ride. Any suggestions?
Go Kart 30 series Engine Torque Converter Clutch 3/4" Bore Bike Fits Predator(http://)
-
Looks like it will work fine. I’ve used one on a China clone motor and a Honda GS190, which is the same as a GC motor.
-
THX Rick.