General Category => Wheels & Tires => Topic started by: GaryF on October 19, 2013, 04:02:13 PM
-
Hello, Can anyone give me the measurements for the front axle nuts, wrench size & turned down round diameter and thickness that fits into the fork. I need to turn a few up on the lathe. I believe the threads are 26TPI. Thanks, Gary
-
Front and rear are the same. Early style was just an open nut turned down to .525" to a depth of .170". The later style were acorn nuts, with the same step. Wrench size is 3/4" on both.
Yes, they are 7/16-26 BSC.
-
BTW, Wayne has reproductions available, if you want chrome acorn nuts.