rear wheel adjusters

[carryall]

Does anyone know of a set of adjuster/tensioners that work on our Servicycles to pull the rear wheel back for tensioning the belt and aligning it?  I thought I had seen a post somewhere but couldn't locate it. Thanks. 

[pd]

Here's the thread :

http://www.simplexservi-cycle.com/index.php?topic=641.msg4745#msg4745

And , here are some end caps :

http://www.ebay.com/itm/triumph-unit-pre-unit-rear-wheel-chain-adjuster-plate-650-500-bobber-chopper-tr6/251007703312?_trksid=p2047675.c100011.m1850&_trkparms=aid%3D222008%26algo%3DSIC.MOTORS%26ao%3D1%26asc%3D22405%26meid%3D6556956660696728457%26pid%3D100011%26prg%3D8888%26rk%3D1%26rkt%3D10%26sd%3D261178097804

Pete .

[carryall]

Thanks, they'll make things a lot easier getting the tension/alignment needed on my H.F. powered bike.

[pd]

Pics when you get them to the functional stage , Please .

Pete .

[carryall]

Here's what I made.  Modeled after a pic another forum member sent me from his.  Just a washer welded to a 1/4" threaded shank and ground down for clearance between.  I'm adding a stainless washer on the back for added strength behind the bracket. It's probably not needed since it's just to center with slight tensioning, until axel bolts are tightened.  I may cut them down in length after installing.  Should work fine and make adjustment a lot easier down the road...

[carryall]

I also installed adjuster and it made the tensioning and centering really easy, and precise.  Should have put them on when I put bike together originally.  Here's a pic of them installed.  BTW, the ATV/quad lift I made worked great for working on the bike, if anyone is looking for a way to tinker with theirs while having/needing the wheels off the ground.