Author Topic: Portland 2014  (Read 6788 times)

kartjockey

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1669
    • View Profile
    • Email
Portland 2014
« on: June 17, 2014, 09:45:05 AM »
I received my camping pass and new membership card the other day. Down to about a month now! The dates I have are July 19th to the 22nd.  Do we all agree? I will travel during the day Friday and get there Friday early enough to get near the 'hill'.  Took the '48 for a ride and all is well. The 'S2' is not back from the powder coaters. it seems he had to go off and get married then go on a honeymoon!  But we are in contact and assures me I will have it soon.

Ricks

  • Administrator
  • Hero Member
  • *****
  • Posts: 3633
  • 1953 Automatic
    • View Profile
    • Email
Re: Portland 2014
« Reply #1 on: June 17, 2014, 12:10:33 PM »
I plan on being there Friday evening also.  It doesn't look like the Sportsman will be running after all.  I have been working on it, and went to start it today.  The repair to the key way on the crank that a previous owner made did not hold.  I will call Wayne in the morning, but I doubt he has a crank for this motor.
Rick

kartjockey

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1669
    • View Profile
    • Email
Re: Portland 2014
« Reply #2 on: June 17, 2014, 03:03:14 PM »
Can your crank be re-repaired? Does the keyway have one good side to it? Maybe we could TIG weld for a good clean weld then skin the  keyway back out and refinish the diameter. Download a pic.

Ricks

  • Administrator
  • Hero Member
  • *****
  • Posts: 3633
  • 1953 Automatic
    • View Profile
    • Email
Re: Portland 2014
« Reply #3 on: June 17, 2014, 03:17:27 PM »
The key way is a mess, all torn up on both sides.  I will bring it to Portland and we can look at it.  I am at work, I will post a picture tomorrow.
Rick

kartjockey

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1669
    • View Profile
    • Email
Re: Portland 2014
« Reply #4 on: June 17, 2014, 03:33:12 PM »
go-kart guys used to use lapping compound and lap the taper and then skip the key so they could adjust the timing where they wanted it. If you end up having to use it we would have to relocate keyway location somehow.

kartjockey

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1669
    • View Profile
    • Email
Re: Portland 2014
« Reply #5 on: June 17, 2014, 03:40:16 PM »
It might be that they left a very small amount of compound on it for grip then tightened the flywheel on.

Mike Sal

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1204
    • View Profile
    • Email
Re: Portland 2014
« Reply #6 on: June 17, 2014, 04:29:57 PM »
Agree that if things aren't made worse (warpage), you should be able to tig up the sides & recut the keyway. 
Mike Sal

Ricks

  • Administrator
  • Hero Member
  • *****
  • Posts: 3633
  • 1953 Automatic
    • View Profile
    • Email
Re: Portland 2014
« Reply #7 on: June 17, 2014, 05:37:40 PM »
The original repair was brazing.  It was a poor job to start, but I was being hopeful.  I also think the crank snout may have been shortened a thread or two.  I will pull the motor back out this weekend and take the crank out.
Rick

Sonrisers

  • Sr. Member
  • ****
  • Posts: 354
    • View Profile
    • www.elegantoakandmore.com
    • Email
Re: Portland 2014
« Reply #8 on: June 17, 2014, 05:39:52 PM »
Sure hope you can get it running in time for portland Rick, I been wanting to see it.

Ricks

  • Administrator
  • Hero Member
  • *****
  • Posts: 3633
  • 1953 Automatic
    • View Profile
    • Email
Re: Portland 2014
« Reply #9 on: July 02, 2014, 08:08:19 AM »
Just over 2 weeks before Portland,  who's going?  I will be staying at the Holiday Inn from Friday until Monday. 
Rick

kartjockey

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1669
    • View Profile
    • Email
Re: Portland 2014
« Reply #10 on: July 02, 2014, 01:23:56 PM »
I should be there mid-afternoon Friday and will leave Wednesday morning.

WVbiker

  • Newbie
  • *
  • Posts: 20
    • View Profile
Re: Portland 2014
« Reply #11 on: July 02, 2014, 04:11:22 PM »
I will be coming to Portland for the first time and looking forward to meeting everone. I will be staying at the Holiday Inn as well

Bob

Sonrisers

  • Sr. Member
  • ****
  • Posts: 354
    • View Profile
    • www.elegantoakandmore.com
    • Email
Re: Portland 2014
« Reply #12 on: July 02, 2014, 08:13:30 PM »
Is there no one camping? What is with you weenies???lol We are gonna stay in our enclosed trailer like we did last year,We are leaving Wednesday and will prob stay in a motel somewhere along the way, so should be there in good time on thurs before the official start. Everybody needs to chime in with when they want to have the group photo, I think either Sat afternoon or Sunday afternoon would be best, I know Rick had mentioned Sunday in another post. I think what ever day, it should be around 3 pm. I want to start announcing the day and time as soon as possible. Lets get as many Simplex's there as possible. It was a blast last year, and we only announced it about an hour b4 the photo.

oil-lamp

  • Hero Member
  • *****
  • Posts: 882
    • View Profile
    • Email
Re: Portland 2014
« Reply #13 on: July 02, 2014, 09:03:40 PM »
We will be there late Friday and staying north of town. Bringing the tow bikes and hoping that one is running. Just ordered some more parts from Wayne today to get old blue running. Just hope there here soon ive got to many sparks now.

kartjockey

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1669
    • View Profile
    • Email
Re: Portland 2014
« Reply #14 on: July 03, 2014, 02:27:10 AM »
I will be camping there James.   Hopefully  Simplex hill is BACK!